3DeVOK MT Gen2 Advanced 3D Scanner
Multi-mode 3D scanning combines different scanning technologies or operating modes in one system so users can capture a wider range of objects and features. A large surface, a fine groove and a deep cavity do not present the same scanning challenge. Switching between modes allows the operator to prioritize coverage, detail or access according to the geometry being captured.

What is multi-mode 3D scanning?
A multi-mode 3D scanner provides more than one way to collect three-dimensional data. Modes may differ in laser pattern, wavelength, field of view, working distance or intended application. The purpose is not to make every mode perform identically; it is to give users a suitable capture method for different parts of the same project.
1. Crossed blue laser: efficient capture of defined geometry
Crossed blue laser lines can capture geometric features across a scanning area and are often used for general-purpose part scanning. The balance between line configuration, speed, accuracy and working distance depends on the scanner. When comparing specifications, check the stated performance for the crossed-laser mode rather than assuming it applies to every mode.
2. Parallel blue laser: detail-oriented scanning
Parallel laser lines can be useful when capturing smaller features and detailed geometry. Resolution is an important specification to review, but it should not be confused with measurement accuracy. The suitability of the mode depends on the feature size, surface and scanning distance.
3. Single blue laser: access to narrow and recessed features
A single laser line can help capture areas that are difficult to reach with a wider pattern, such as deep holes, narrow gaps and recessed geometry. It is particularly useful as a complementary mode: the operator can use a broader pattern for accessible surfaces and switch to a single line when additional access is needed.
4. Infrared laser and structured-light modes: broader-area capture
Infrared scanning modes can support efficient capture of larger areas and marker-free workflows, depending on the scanner design and tracking method. A broad scan area can reduce the number of passes needed for large objects. Users should still evaluate tracking stability, working distance, surface compatibility and the amount of data processing required.
How the modes work together
|
Scanning mode |
Primary role |
Example of a suitable feature or task |
|
Crossed blue laser |
General geometric capture |
Components with defined edges and surfaces |
|
Parallel blue laser |
Fine-detail capture |
Small grooves and detailed geometry |
|
Single blue laser |
Access to recessed areas |
Deep holes and narrow gaps |
|
Infrared structured light |
Large-area capture |
Broad surfaces and marker-free workflows |
The best workflow may use more than one mode on a single object. An operator could capture the main body using a broad-area mode, scan detailed features with a blue laser mode and use a single laser line to reach recessed areas. The resulting datasets can then be aligned and processed in the appropriate software.
A practical example: multi-mode scanning with 3DeVOK MT Gen2
The 3DeVOK MT Gen2 combines several scanning modes for different capture requirements. Its 34-line crossed blue laser mode is specified at 0.03 mm accuracy and up to 80 FPS. Its 11-line parallel blue laser mode is specified at 0.05 mm resolution, supporting detail-oriented capture. A single blue laser mode is available for deep holes and narrow gaps. For larger surfaces, its infrared mode provides a scan area of 1100 × 1000 mm and supports marker-free scanning workflows.
These specifications describe different modes and should be interpreted separately. The 0.03 mm accuracy figure belongs to the 34-line crossed blue laser mode; the 0.05 mm figure for the parallel blue laser mode is resolution, not accuracy. The infrared scan area describes coverage, not measurement accuracy. Always consult the current technical specifications for operating conditions and mode-specific details.
The 3DeVOK MT also combines blue laser and infrared scanning options, making it suitable for workflows that move between detailed geometry and broader capture. The MQ provides an infrared-focused option for large-area, marker-free scanning tasks, with a stated accuracy of 0.08 mm. The best fit depends on the required detail, object size and measurement goals.
How to choose the right mode for an object
- Begin with the overall size and geometry of the object.
- Identify small features, recessed areas and hard-to-reach surfaces.
- Choose a mode that provides suitable coverage for the main body.
- Switch to a detail-oriented or single-line mode where necessary.
- Check tracking and alignment as you move between scanning areas.
- Review the completed data for gaps, noise and alignment consistency.
From scanning to usable 3D data
Multi-mode capture is only one part of the workflow. After scanning, data may need alignment, mesh optimization, hole filling or inspection. For reverse engineering, the mesh can be used as a reference for surface reconstruction in software such as QUICKSURFACE or Geomagic Design X. For 3D printing, the model may need to be checked for scale, watertightness and printability. The required processing depends on the final application.
Frequently asked questions
What is the main advantage of a multi-mode 3D scanner?
It allows users to adapt scanning to different object sizes and feature types without changing devices. The value depends on whether the available modes match the real requirements of the work.
Is blue laser scanning always more accurate than infrared scanning?
No universal rule applies. Performance depends on the scanner design, mode, object surface and test conditions. Compare mode-specific specifications and test the actual parts.
What is the difference between scan resolution and accuracy?
Resolution describes the level of detail represented in the scan, while accuracy describes how closely measured geometry matches the real object. A resolution figure should not be presented as an accuracy figure.
Can I use different modes on the same object?
Yes. A multi-mode workflow can use a broad mode for overall coverage and a more specialized mode for fine or recessed features. The datasets must then be aligned and checked as part of processing.
