| 3DeVOK MT Gen2 | |||||
|---|---|---|---|---|---|
|
Light Sources
|
34 Cross Blue Laser Lines | 11 Parallel Blue Laser Lines | 1 Single Blue Laser Line | Infrared Vcsel Structured Light | |
|
Class of Lasers
|
Class Ⅱ (Eye-safe) | Class Ⅰ (Eye-safe) | |||
|
Basic Accuracy*
|
Up to 0.03 mm | ||||
|
Volumetric Accuracy*
|
Up to 0.03 mm+0.04 mm/m | ||||
|
Resolution
|
0.1-5.0mm | 0.05-5.0mm | 0.1-5.0mm | 0.2-5.0mm | |
|
Alignment Mode
|
Hybrid Alignment, Marker Alignment, Texture Feature Alignment and Geometric Feature Alignment |
Hybrid Alignment, Marker Alignment, Texture Feature Alignment and Geometric Feature Alignment |
|||
|
Wireless Scanning
|
Support (with wireless handle) | ||||
|
Ability to Capture Texture
|
Yes | ||||
|
Focus Distance
|
325mm | 210mm | 325mm | 400mm | |
|
Max. Scan Distance
|
1,000mm | 295mm | 600mm | 1,500mm | |
|
Field of View
|
140mm × 140mm - 490mm × 490mm* | 50mm × 75mm - 1,100mm × 1,000mm | |||
|
Scanning Speed
|
Up to 3,300,000 Points/s | Up to 4,500,000 Points/s | |||
|
Scanning Frame
|
Up to 80 FPS (Marker Alignment) | Up to 30 FPS | |||
|
Output Formats
|
*.obj, *.stl, *.ply, *.asc, *.mk2, *.txt, *.epj, *.apj, *.spj, *.map, *.sk | ||||
|
The Ability for 3D Printing
|
Supports .stl, .obj and other formats | ||||
|
Working Temperature
|
0 - 40 ℃, 10% - 90% RH (Non-condensing) | ||||
|
Interface
|
USB 3.0 | ||||
|
Scanner Dimensions & Weight
|
Dimensions: 215 mm × 73 mm × 53 mm; Weight: 620 g | ||||
|
Power Source
|
DC：12 V，5.0 A | ||||
|
Certifications
|
CE-EMC, FCC, RoHS, IEC 60825, IEC 62471, WEEE, KC | ||||
|
Recommended Configurations for PC
|
OS: Win10/Win11, 64-bit; CPU: i7-13650HX and above; RAM: 32GB and above; Graphic Card: NVIDIA discrete graphics card, NVIDIA RTX3060 and above; Graphics memory: 6GB and above |
||||
|
*Crossline Blue Laser
*The accuracy of the Blue Laser Marker Mode has been verified by the laboratory's theoretical accuracy test standards. A factory accuracy test report is included for verification. |
|||||
The optimal scanning distances for each light source of MT Gen2 are as follows: blue crossed lines 250～300mm, blue parallel lines 210～260mm, blue single line 250～300mm, and infrared structured light 250～400mm. Scanning within this range delivers the best detail and accuracy.
It adds a single-line scanning mode for better acquisition results in hard-to-scan areas such as deep holes and dead corners. It is upgraded with 7 blue parallel laser lines, achieving the resolution of 0.05mm, with an overall improvement in high-precision detail scanning capability.
Yes, it supports hybrid alignment for crossed lines, parallel lines and single lines. You can also switch freely during scanning to adapt to different scanning scenarios.
The 3DeVOK MT Gen2 is designed for precision-demanding applications such as reverse engineering, complex part digitization, automotive customization, and 3D inspection. Its multiple blue laser scanning modes help capture detailed geometry for CAD reconstruction, design modification, and dimensional analysis.
Internal Link: Reverse Engineering Solutions · Product Selection Guide
Yes. The MT Gen2 features a single blue laser line mode designed for capturing data in deep holes, narrow grooves, and other hard-to-reach areas. This capability is useful when digitizing complex mechanical components for reverse engineering and detailed 3D modeling.
Internal Link: Deep Hole Scanning Article
Yes. The MT Gen2 can capture detailed geometry from vehicle components and custom parts to support CAD modeling, fitment development, and design modifications. The appropriate scanning mode depends on the component's geometry, surface condition, and required level of detail.
Internal Link: Automotive Customization Solutions · Product Selection Guide
