3DeVOK MT Gen2 Advanced 3D Scanner
How to Repair 3D Scanned Mesh Models in Geomagic Wrap
Bottom line: Raw 3D scans almost always contain mesh defects. Geomagic Wrap provides a targeted set of repair tools—Fill Holes, Sandpaper, and QuickSmooth—that can convert a noisy scan into a clean, watertight mesh suitable for 3D printing, rendering, or CAD conversion.
Why Scanned Meshes Need Repair
Even with a high-quality 3D scanner, the resulting triangle mesh is rarely perfect. Common problems include:
- Holes: Areas that were not visible to the scanner, such as undercuts or occlusions.
- Spikes and noise: Errant points caused by reflections, edges, or movement.
- Rough surfaces: High-frequency noise that makes the model look bumpy.
- Non-manifold geometry: Edges shared by more than two faces, which can confuse 3D printing or CAD software.
The video demonstrates how to address these issues using Geomagic Wrap 2021 on a scanned hand model.

Figure 1: A 3D scanned hand model imported into Geomagic Wrap 2021.
Understanding Mesh Topology Fundamentals
Before diving into repair, it is useful to understand what a triangle mesh actually is. A mesh is a collection of vertices, edges, and triangular faces that approximate a surface. Each triangle connects three vertices, and each edge should be shared by exactly two triangles in a manifold mesh. When this rule is violated—through holes, duplicate faces, or non-manifold edges—downstream software such as slicers, CAD converters, and simulation tools may fail or produce unpredictable results.
A well-formed mesh has several key properties:
- Manifoldness: Every edge belongs to exactly two triangles (or one, if on a boundary that will later be filled).
- Consistent orientation: All face normals point outward, so the inside and outside of the model are unambiguous.
- Watertightness: There are no holes, meaning the mesh encloses a single, continuous volume.
- Reasonable triangle distribution: Triangles are relatively uniform in size and not excessively elongated, which improves both visual quality and computational performance.
These properties matter because most downstream applications—whether 3D printing, finite element analysis, or NURBS surface fitting—assume the input mesh satisfies them. Geomagic Wrap's repair tools are designed to restore these properties when scan data falls short.
Triangle Density and Scan Resolution
The density of triangles in a scan is directly related to the scanner's resolution setting. Higher resolution produces more triangles and captures finer detail, but it also generates larger files and can amplify noise. Lower resolution produces smaller, more manageable files but may miss small features.
When repairing a mesh, operators should consider whether the triangle density is appropriate for the intended use:
| Use Case | Recommended Triangle Count | Notes |
|---|---|---|
| 3D printing (small object) | 50,000–500,000 | Sufficient detail for most desktop printers |
| 3D printing (large object) | 100,000–1,000,000 | Balance between detail and print preparation time |
| CAD reverse engineering | 500,000–2,000,000 | Higher density aids accurate surface fitting |
| Rendering / visualization | 100,000–500,000 | Decimate aggressively; appearance matters more than precision |
If a scan arrives with millions of triangles, using the Decimate tool early in the workflow can speed up subsequent repair steps without sacrificing meaningful detail.
Getting Started in Geomagic Wrap
After importing the STL or similar mesh file, switch to the Polygons tab. This tab contains the main mesh repair tools:
- Mesh Doctor: Automated diagnosis and repair
- Fill Holes: Closes gaps in the mesh
- Remove Spikes: Deletes protruding artifacts
- Smooth: Reduces surface noise
- Sandpaper: Interactive localized smoothing
For most repair tasks, a combination of manual and automatic tools produces the best result. Mesh Doctor can serve as a first pass to catch obvious issues, but a trained eye reviewing the model manually will often catch subtler defects that automated tools overlook.
Step 1: Inspect the Mesh
Before repairing, identify the defects. Rotate the model and look for:
- Dark spots indicating holes
- Sharp spikes sticking out from the surface
- Bumpy or noisy regions
- Overlapping or folded triangles
The video zooms in on a hole on the back of the hand to show a typical defect.

Figure 2: A close-up view reveals a hole in the scanned hand mesh.
Geomagic Wrap also offers diagnostic panels that highlight boundary edges, non-manifold edges, and intersecting faces. Running these diagnostics before manual inspection gives operators a quick overview of how much repair work will be needed.
Step 2: Fill Holes
The Fill Holes tool closes gaps in the mesh. The video uses the Fill Single mode to repair a specific hole.
To fill a hole:
- Select the hole boundary or use the Fill Single tool.
- Geomagic Wrap triangulates the opening based on surrounding curvature.
- Review the result to ensure the fill matches the intended surface.
For larger or more complex holes, Fill All or Fill by Boundary may be more appropriate. Fill by Boundary gives operators control over which edges define the patch, which is useful when a hole spans a complex curved region where automatic triangulation might produce a flat or incorrect surface.

Figure 3: The Fill Holes tool closes the selected gap in the mesh.
Evaluating Fill Quality
After filling a hole, inspect the patched area from multiple angles. A good fill should:
- Follow the curvature of the surrounding surface
- Not introduce spikes or self-intersections
- Have triangles of similar size to neighboring regions
- Preserve any sharp edges or creases that exist on the real object
If the automatic fill does not meet these criteria, undo it and try a different approach—such as filling by boundary or manually constructing triangles.
Step 3: Remove Spikes
Spikes are isolated triangles or clusters that protrude far from the surface. They often result from reflections or edge effects during scanning.
The Remove Spikes tool detects and deletes these artifacts based on a height threshold. After removal, the surrounding area may need additional smoothing or hole filling.

Figure 4: The hand mesh after the hole has been filled.
A conservative spike-removal threshold is recommended as a starting point. If the threshold is set too high, legitimate small features such as fingertips or fine surface details could be mistaken for spikes and deleted. Conversely, a threshold that is too low will leave many artifacts behind, requiring multiple passes.
Step 4: Smooth the Surface
Raw scans often have high-frequency noise that makes surfaces look rough. Geomagic Wrap offers several smoothing options:
- Relax: Gently relaxes vertex positions while preserving shape.
- QuickSmooth: A faster smoothing operation.
- Sandpaper: Interactive tool for brushing smoothness onto specific areas.
The video demonstrates the Sandpaper tool, which allows the user to paint smoothness directly onto the model. This is useful when only certain areas need refinement.

Figure 5: The Sandpaper tool selected for interactive localized smoothing.
Choosing the right smoothing strategy depends on the model and its intended use. For organic shapes like the hand model in the video, a combination of QuickSmooth for broad areas and Sandpaper for transitions works well. For mechanical parts with sharp edges, Relax may be preferable because it is less likely to round off defined features.
Geomagic Wrap vs. Geomagic Design X
Operators sometimes ask whether Geomagic Wrap or Geomagic Design X is the right tool for mesh repair. Both are part of the 3D Systems product family and share some overlapping functionality, but they serve different primary purposes:
| Feature | Geomagic Wrap | Geomagic Design X |
|---|---|---|
| Primary focus | Mesh cleanup, repair, and preparation | CAD reverse engineering from scan data |
| Mesh repair tools | Fill Holes, Remove Spikes, Smooth, Sandpaper | Basic mesh repair; emphasis on feature extraction |
| CAD export | Limited; primarily mesh formats | Full parametric CAD export (STEP, IGES, native formats) |
| NURBS fitting | Not a primary function | Comprehensive surfacing tools |
| Typical user | 3D printing technicians, digital artists, archaeologists | Engineers performing reverse engineering |
| Price point | Lower | Higher |
For a workflow that stops at mesh repair—preparing a scan for 3D printing, rendering, or archival—Geomagic Wrap is sufficient and cost-effective. If the end goal is a parametric CAD model, Design X provides the surfacing and sketching tools needed to move from mesh to solid model.
Step 5: Verify the Result
After repair, check the model for:
- Watertightness: No remaining holes
- Smooth transitions: Filled areas blend with surrounding geometry
- Preserved detail: Important features are not over-smoothed
- Triangle count: Model is not unnecessarily dense
The repaired hand model in the video is smooth, watertight, and ready for downstream use.

Figure 6: The final repaired hand mesh model in Geomagic Wrap.
Quality Control After Repair
A final quality-control pass should include the following checks:
- Run Mesh Doctor one more time to catch any remaining non-manifold edges, zero-area triangles, or intersecting faces that may have been introduced during manual repair.
- Measure key dimensions and compare them against the original object or design intent. If the scan was taken for dimensional accuracy, deviations introduced by smoothing or filling should be within acceptable tolerances.
- Export a preview and open it in the target downstream application—a slicer, a rendering tool, or a CAD package—to confirm compatibility before final delivery.
Typical Repair Workflow
| Step | Tool | Purpose |
|---|---|---|
| 1 | Inspect | Identify holes, spikes, and noise |
| 2 | Fill Holes | Close gaps in the mesh |
| 3 | Remove Spikes | Delete protruding artifacts |
| 4 | Smooth / Sandpaper | Reduce noise and refine surfaces |
| 5 | Verify | Confirm watertightness and detail preservation |
Frequently Asked Questions
Q1: Can Geomagic Wrap fully automate mesh repair? Mesh Doctor can automate common fixes, but manual review is usually needed for best results.
Q2: Will smoothing remove important details? Aggressive smoothing can. Use localized tools like Sandpaper to control where smoothing is applied.
Q3: What file formats can Geomagic Wrap repair? STL, PLY, OBJ, and several other mesh formats are supported.
Q4: Is the repaired mesh always watertight? Not automatically. Check for and fill all holes before exporting for 3D printing.
Q5: Can I undo repairs? Yes. Geomagic Wrap supports undo, and it is good practice to save incremental versions.
Q6: How do I know when to stop smoothing? Stop when noise is reduced but primary features and contours are still recognizable.
Q7: Can repaired meshes be converted to CAD? Yes. Clean, watertight meshes can be used as the basis for NURBS surface fitting or direct CAD modeling.
Q8: Should I decimate the mesh before or after repair? It is generally better to repair first and decimate afterward. Repairing on the original-density mesh gives tools more geometric information to work with. Decimating afterward simplifies the final output without compromising repair quality.
Q9: What is the difference between Geomagic Wrap and Geomagic Design X for mesh repair? Geomagic Wrap focuses on mesh cleanup and preparation. Design X includes basic mesh repair but is primarily designed for reverse engineering scans into parametric CAD models.
Watch the Video
Conclusion
Learn more about 3D scanning solutions for inspection.
Learn more about 3D scanning solutions for reverse engineering.
Repairing 3D scanned meshes is a standard step in any scan-to-CAD or scan-to-print workflow. Geomagic Wrap provides an efficient toolset for closing holes, removing spikes, and smoothing surfaces. By following a systematic repair process, operators can transform raw scan data into clean, usable meshes. Understanding mesh topology fundamentals, choosing appropriate triangle density, and performing quality-control checks after repair all contribute to better downstream outcomes—whether the goal is 3D printing, rendering, or conversion to CAD.
Professional scanner manufacturers such as 3DeVOK publish accuracy specifications and verification guidelines to help users get reliable results.
