3DeVOK MT Gen2 Advanced 3D Scanner
Geomagic Wrap Mesh Repair Workflow: Fill Holes, Smooth, and Prepare for 3D Printing
Bottom line: A 3D scan must be converted into a watertight, manifold mesh before it can be reliably 3D printed. Geomagic Wrap's repair workflow—fill holes, remove spikes, smooth, and verify—prepares scan data for additive manufacturing in a few targeted steps.
From Scan to Print
The promise of 3D scanning is that any physical object can be digitized and reproduced. In practice, the scanned mesh almost always needs repair before a 3D printer can process it. The video demonstrates this on a scanned hand model, showing how a few tools in Geomagic Wrap can transform a raw scan into a clean, printable file.
This article organizes those steps into a repeatable workflow for 3D printing preparation.

Figure 1: A scanned hand model imported into Geomagic Wrap for repair.
Step 1: Import and Orient the Mesh
Import the scan in STL, PLY, or OBJ format. Orient the model so that the surfaces you need to repair are easy to see. Use the display settings to show triangles, boundaries, and non-manifold edges if available.
Proper orientation matters for more than just visibility. When the model is oriented so that the primary surfaces face the operator, it becomes easier to spot holes, spikes, and noisy regions that would otherwise be hidden behind the model or in shadow. If the model has a clear "front" or primary feature surface, orient that face toward the viewer first.
Step 2: Fill All Holes
A 3D printer requires a watertight mesh. Any opening in the surface will confuse the slicer and may produce a failed print.
Geomagic Wrap provides multiple hole-filling options:
- Fill Single: Closes one selected hole at a time.
- Fill All: Closes all detected holes automatically.
- Fill by Boundary: Allows control over the patch shape.
For 3D printing, Fill All is often the fastest starting point. Afterward, inspect each filled region to ensure it follows the intended surface.

Figure 2: Filling a hole in the scanned hand mesh.
Choosing the Right Fill Method
The choice between Fill Single, Fill All, and Fill by Boundary depends on the number and complexity of the holes:
| Scenario | Recommended Method | Reason |
|---|---|---|
| One or two small holes | Fill Single | Fast and controllable |
| Many small holes across the model | Fill All | Efficient for batch repair |
| Large or complex holes on curved surfaces | Fill by Boundary | Provides control over patch curvature |
After filling, always orbit around the patched areas. A fill that looks correct from one angle may reveal itself to be flat or distorted when viewed from a different direction.
Step 3: Remove Spikes and Artifacts
Spikes can cause the printer to attempt impossible geometries or create weak points in the print. Use Remove Spikes to delete protruding triangles.
For best results:
- Start with a conservative threshold
- Inspect the model from multiple angles
- Repeat if necessary

Figure 3: The hand mesh after hole filling, before spike removal and smoothing.
Spikes are particularly problematic for FDM printing because the slicer interprets them as real geometry and may generate toolpaths that attempt to deposit material in mid-air. For resin printing, spikes can create artifacts on the support structure or the printed surface itself. Removing them before export eliminates these failure modes.
Step 4: Smooth the Surface
3D scans often have a rough, noisy surface. For 3D printing, some smoothing improves appearance and reduces unnecessary detail that does not affect the print.
The video demonstrates two useful approaches:
- Global smoothing: QuickSmooth or Relax for overall noise reduction.
- Localized smoothing: Sandpaper for brushing smoothness onto specific areas.
Avoid over-smoothing. Important features such as fingertips, knuckles, and creases should remain visible.

Figure 4: The Sandpaper tool allows localized interactive smoothing.
Smoothing Strategy for Different Print Types
The amount of smoothing needed depends on the intended print technology and the purpose of the printed object:
| Print Type | Smoothing Approach | Rationale |
|---|---|---|
| FDM decorative object | Moderate to heavy | Surface roughness from FDM layers masks fine detail anyway |
| FDM functional part | Light to moderate | Preserve dimensional accuracy and functional features |
| Resin (SLA/DLP) | Light | High-resolution resin captures fine detail; excessive smoothing wastes this advantage |
| SLS (selective laser sintering) | Moderate | SLS surfaces have a grainy texture; moderate smoothing reduces noise without losing form |
Step 5: Check for Non-Manifold Geometry
Non-manifold edges, zero-area triangles, and inverted normals can cause slicer errors. Use Geomagic Wrap's mesh analysis tools to identify these issues:
- Non-manifold edges
- Intersecting faces
- Duplicate triangles
- Boundary edges
Fix any remaining issues before export.
Most modern slicers include their own mesh-repair functions, but relying on the slicer to fix problems is risky. Slicer-level repairs are often opaque—operators cannot see what was changed—and may produce unexpected results. Fixing all topology issues in Geomagic Wrap gives full control over the final mesh quality.
Step 6: Decimate if Necessary
Scans can be extremely dense, with millions of triangles. While modern slicers can handle large files, excessive density slows processing without improving print quality.
Use the Decimate tool to reduce triangle count while preserving shape. Aim for a balance between file size and surface fidelity.
As a general guideline, desktop FDM printers rarely benefit from meshes with more than 500,000 triangles, because the layer height and nozzle diameter limit the achievable detail. Resin printers can justify higher counts—up to 1 or 2 million triangles—for highly detailed miniatures or jewelry, but even then, diminishing returns set in quickly.
Step 7: Export for Printing
Export the repaired mesh as an STL or OBJ file. Before printing:
- Import the file into your slicer to verify it is watertight
- Check wall thickness for fragile areas
- Orient the model for the best support strategy

Figure 5: The final repaired hand mesh, ready for export and 3D printing.
3D Printing Tolerances and Mesh Preparation
Different 3D printing technologies have different tolerances, and the mesh should be prepared with the target technology in mind. Understanding these tolerances helps operators decide how much smoothing and decimation is appropriate.
| Print Technology | Typical Tolerance | Layer Height | Recommended Mesh Detail |
|---|---|---|---|
| FDM (desktop) | ±0.2–0.5 mm | 0.1–0.3 mm | Moderate; fine detail is lost in layer lines |
| FDM (industrial) | ±0.1–0.2 mm | 0.05–0.15 mm | Higher detail justified |
| SLA/DLP (resin) | ±0.05–0.1 mm | 0.025–0.1 mm | High detail; preserve fine features |
| SLS | ±0.1–0.3 mm | 0.1–0.15 mm | Moderate; surface is grainy regardless |
| MJF (HP Multi Jet Fusion) | ±0.1–0.2 mm | 0.08 mm | High detail; good for functional parts |
If the printed object's tolerance is ±0.3 mm, there is little value in preserving mesh features smaller than 0.3 mm. Smoothing or decimating those features away produces a cleaner, more manageable file without affecting the printed result.
Wall Thickness Considerations
3D printers require a minimum wall thickness to produce a viable part. If the scanned mesh contains thin sections—such as the walls of a hollow object or thin protrusions like fingers on a hand model—operators should verify that these sections meet the minimum wall thickness for the chosen print technology:
- FDM: Minimum wall thickness ~0.8–1.0 mm (typically 2–3 nozzle widths)
- SLA/DLP: Minimum wall thickness ~0.4–0.6 mm
- SLS: Minimum wall thickness ~0.7–1.0 mm
Sections thinner than these values may not print correctly. In Geomagic Wrap, operators can inspect wall thickness visually or use measurement tools to verify critical dimensions before exporting.
File Formats for Different Downstream Uses
The choice of export format depends on what happens next in the pipeline. Different downstream applications prefer different formats:
| Format | Best For | Key Properties |
|---|---|---|
| STL | 3D printing (all technologies) | Universal slicer support; binary format is compact; no color |
| OBJ | 3D printing with color; rendering | Supports vertex colors and textures; widely supported |
| PLY | Archival; scientific visualization | Supports color; compact binary; good for dense meshes |
| 3MF | 3D printing with material/color info | Modern format; supports multiple materials and colors |
| STEP / IGES | CAD import | Not a mesh format; requires conversion to solid/surface in Design X |
For most 3D printing workflows, binary STL is the safest and most universally supported choice. If the scan includes color data that should be preserved in the print—such as a full-color hand scan destined for a PolyJet printer—3MF or OBJ with texture maps is more appropriate.
Quality Control After Repair
Before sending the repaired mesh to the printer, a final quality-control pass helps catch any remaining issues:
- Open the exported file in the slicer and check whether it reports any mesh errors. Most slicers display a warning if the mesh is non-manifold or has holes.
- Preview the sliced layers to confirm that the toolpaths look correct. Artifacts in the toolpath preview often indicate mesh defects that were not caught earlier.
- Measure critical dimensions in the slicer's measurement tools and compare against the original object or design specifications.
- Check support generation to ensure supports are not being generated inside hollow areas or on surfaces that should be clean.
Workflow Checklist
| Step | Action | Goal |
|---|---|---|
| 1 | Import and orient | Prepare the mesh for repair |
| 2 | Fill holes | Create a watertight surface |
| 3 | Remove spikes | Eliminate protruding artifacts |
| 4 | Smooth | Reduce noise and improve surface quality |
| 5 | Check manifold geometry | Prevent slicer errors |
| 6 | Decimate | Optimize file size |
| 7 | Export and verify | Confirm printability |
Frequently Asked Questions
Q1: Can I 3D print a raw scan without repair? Usually no. Raw scans contain holes, noise, and non-manifold geometry that cause print failures.
Q2: What is the best export format for 3D printing? STL is the most widely supported format. OBJ is also common and supports color if needed. For multi-material or full-color prints, 3MF is recommended.
Q3: How much smoothing is too much? Stop when noise is removed but recognizable features are still present. Compare against the original scan periodically.
Q4: Do I need to decimate before printing? Only if the file is unnecessarily large. Many slicers handle millions of triangles, but processing time increases.
Q5: What causes non-manifold geometry? Overlapping scans, incomplete hole fills, and duplicate triangles are common causes.
Q6: Can Geomagic Wrap fix all printability issues? Most common issues, yes. Severely damaged scans may require additional tools or manual remeshing.
Q7: Should I hollow the model before printing? For resin or large FDM prints, hollowing reduces material use. This is typically done in the slicer or CAD software after export.
Q8: What minimum wall thickness should I check for? FDM requires at least 0.8–1.0 mm. Resin printing can go down to 0.4–0.6 mm. SLS needs about 0.7–1.0 mm. Always verify thin sections in the mesh before exporting.
Q9: Should I use STL or 3MF for printing? STL is the safest universal choice and works with all slicers. 3MF is better when color, material assignment, or component metadata needs to travel with the file. If in doubt, export both and test in your slicer.
Watch the Video
Conclusion
Preparing a 3D scan for printing requires more than a simple export. A systematic repair workflow in Geomagic Wrap—filling holes, removing spikes, smoothing, and verifying manifold geometry—ensures that the digital model will print as intended. By understanding print technology tolerances, choosing the right export format, checking wall thickness, and performing quality control in the slicer, operators can reduce failed prints and improve the quality of the final physical reproduction. Investing time in this preparation step pays dividends in reliability and consistency across every print that follows.
This workflow is compatible with data from a wide range of 3D scanners, including professional handheld scanners from 3DeVOK.
Explore more 3D scanning solutions for design, education, engineering, and creative applications.
